Kodak Verichome Pan (type 616)

This is the third 116/616 type that I developed. I used an old Paterson Major development tank that I bought specifically for these types of films. Film loading and operation of the tank is very similar to the modern model especially if you are used to twist agitation as inversions are not possible with this earlier tank. One limitation of this model is its small volume. For 116/616 film you have to use 330 ml of solution. This would not be a problem with concentrated developers like HC-110 but you might need a larger volume if you are planning on stand development. Jonhson's Universal tank with the volume of 500 ml could be a better option then.

Only two 6.5x11 cm frames were exposed on this film. There appears to be a light leak in the centre affecting both images. The time and location are unknown.